7 Drywall Types, Applications and Uses: Purple, Green, Blue or White
The Best Products And Quality in Building Supplies
You may be asking yourself which drywall is the best for the project you are undertaking. Depending on the job and the place you want it set up, there are different kinds of drywall you can use. Drywalls also go by different names, some of these names being: Gyp Board, Wallboard, Plaster Board, Sheetrock, Gypsum Board or Drywall.
In the section below, you will discover the application and the differences that lie between paper, paperless, blue, green, and white, Type X, and noise-proof drywall.
White Board or Regular Drywall
White board is usually white on one side and brown on the other. It comes in different sizes varying from 3/8 to 1 inch and is mostly available in the form of 4*8 boards. We could say that regular drywall is possibly the most pocket friendly drywall type as well as the most common drywall used. It is easy to find it in commercial shops that sell building supplies Toronto.
Green Board Drywall
This type of drywall is also commonly referred to as the moisture resistant drywall. It has a green cover which makes it repel more moisture than the regular drywall. Note that green board is not waterproof, so ensure that it is not set up in a place where it is going to be near water. You can use it as a tile backer in areas with minimal wetness e.g. basement areas, kitchens, laundry and utility rooms.
Blue Board Drywall
Also referred to as the plaster baseboard, this type of drywall is convenient for veneer plastering as the surface paper has unique retention qualities. Unlike the green board drywall, blue board works great in bathroom areas or places that get in contact with water. It is perfect for wet areas because it has great mold and water resistance qualities.
It was not made for tape, mud or paint but it certainly does a good job at minimizing noise and offering low emissions. Overall, we can say that blue board is the best choice when it comes to performance.
Paperless drywall has a covering of fiberglass rather than paper. In fact, over the years, paperless drywall has slowly been substituting paper drywall in the market. This is because it grants greater resistance to mildew and mold, plus it shields the gypsum board from blight. The only factor about it is that it is a little bit tougher than other regular drywalls so one may have to apply some joint compound in order to obtain a clean, smooth drywall level.
Purple drywall can be set up on all ceiling and wall applications as well as in areas with high levels of moisture. Due to its improved moisture resistance, this drywall becomes favorable in areas prone to mold and moisture.
Type X Drywall
Fire-resistant drywall, as it’s so-called, constitutes unique noncombustible fibers. It is usually used in apartment buildings, rooms and garages because it’s a requirement in numerous building codes. It comes in 5/8” thickness and this extra thickness enhances its noise-proofing characteristics. It is used where fire rating is more than 20 minutes.
Sound Proof Drywall
It is normally used in places where noise is an issue. It’s consists of a laminated drywall built with a blend of gypsum, wood fibers, and polymers boosting the Sound Transmission Class. Soundproof drywall may be a little bit difficult to cut as it is denser than the regular wall. Contact a reputable drywall supplier Toronto today by getting in touch with Bernardi Building Supplies anytime you need a drywall installed.
Additional Articles for Drywall and Acoustical
- 7 Important Drywall Insulation Safety Tips
- Drywall Tape Coat - How to
- Do and Don’ts when soundproofing wall
- Mudding Drywall - How to
- 7 Drywall Types, Applications and Uses: Purple, Green, Blue or White
- Wall Soundproofing Materials
- 5 Steps For Effective And Efficient Drywall Hanging
- How To Finish Drywall
- Green Glue FAQ
- What is QuiteRock drywall?
2 Locations To Serve You
We have 2 convenient locations in Toronto and Mississauga to serve you better.